Shuffleboard Court FAQs

We recommend a level concrete surface for optimum performance, but any hard, level surface will work well.

VersaCourt tile can be cleaned in a variety of ways. If it is an outdoor application, leaves, sticks and trash can build up on the surface. A leaf blower can be used to remove most debris. If the tile surface is dusty or dirty then a power washer can be used – be sure to set it on a low-pressure setting and do not directly spray the painted lines.  Over time dirt, leaves, rocks and other debris may accumulate under the tile. If this does occur to the point where the tile is full, undo the tiles in large sections and slide the tile out of the way to clean the subsurface.

Custom shuffleboard courts normally ship within 7-10 business days. Please check with your representative to obtain a firm delivery date as seasonal volume can increase production timelines significantly.

VersaCourt outdoor shuffleboard tiles come with a lifetime warranty.

The VersaCourt surface is designed to withstand all types of weather conditions outdoors including cold and hot. We have courts installed in Canada, Alaska, Mexico, South America and other harsh climate areas.

Our pre-painted shuffleboard court kits can typically be assembled in 30-45 minutes. The kits come in small sections labeled with numbers that correspond to a diagram on how to assemble. It is as easy as putting together legos.

VersaCourt is an ideal surface for shuffleboard. Disc slide is enhanced by the use of either our disc wax or by applying a light spray of silicone to the bottom of the shuffleboard disc prior to play. See VersaCourt Shuffleboard Court in Action.

While it is very infrequent that tiles get damaged, it is nice to know that most can be replaced in a matter of minutes.  Simply insert a hook or screwdriver into a hole closest to the corner of the tile which does not have loops and pull up.